Instructions for use:
Dissolve the salt in previously prepared demineralized water. Water temperature should be about 24°C. For salinity of 33 ppt (1.025 S.G.), dissolve about 390g in 10 litres of water. Stir the solution vigorously for about 15 minutes. Once the salt is fully dissolved and the solution is clear, the saline water is ready to use. Keep the salt in a dry and dark place. Once dissolved, use the salt within 5 days. Evaporation can change water parameters, so keep freshly mixed saltwater in a sealed container if you don’t use it right away. You should check the salinity of your saltwater again before use if you store it for a couple of days. This product is for aquarium use only. Not suitable for human consumption. Keep away from children.
Aquaforest products are manufactured in the EU under strict laboratory supervision to meet the highest quality standards. Each product is prepared from carefully selected raw components in quantities proven to yield consistent compositi on.
How is our Marine Salt product range tested?
We mix our Marine Salt in 1 metric tonne batches, and 3 separate samples per batch are collected during the production stage for testing. Each of these samples is dissolved in 15 litres of RO water. Our experienced team of professionals perform ICP-OES analysis to verify that the chemical compositi on is within consistent range, and to rule out the presence of unwanted contaminants at the same time. Note: Even though our salt is thoroughly mixed, not every bucket/box will be identical. The parameters can vary slightly between containers and around a 2-3% variation is acceptable. This fluctuation is a result of both physical properties of the mix and the limitations of the processing techniques available. These variations are still smaller than the typical margin for error for popular hobbyist test kits.
